• Programming display to set cycles (37ºC / 8 hours or 55ºC / 4 hours) and ventilation times from 2 to 24 hours. Current phase in progress and time remainign are shown in display along the entire cycle.

• Automatic break-cartridge system inside the chamber.

• It works with vacuum technique, neutralizes the gas through bubbling water (by means of liquid-ring pump), has security thermostat and a humidification system.

• In-chamber aeration eliminates the need to transfer the load to a separate aerator.

• Eliminates any residual EO vapors to maximize operator safety when the door is opened.

• Power outage cycle recovery.

• The sterilizer does not need extra requirements for installation.

• Easy to transport due to its small size and wheeled base.

• Automatic detection of failures.

• All our sterilizers are subject to the following tests: dielectric strength, leakage current and earthling resistance.

• This model features data printer which records the sterilization parameters of the cycles.

• The sterilizer is also equipped with a programming display to set the appropriate cycle for the items to be sterilized and to see the information of the running cycle: temperature, vacuum and time remaining.

• Designed to sterilize heat-and-moisture-sensitive medical devices.
• It works with single use 100% EO cartridges (BM2: BIOLENE® 50 gr / BM4: BIOLENE® 100 gr).
• Chamber and cabinet enterily made of stainless steel.
• Max.consumption: BM2: 1200 w. / BM4: 1500 w.
• Power supply: 110V - 220V (on request).