Inicio Contacto English
Empresa Esterilizadores Selladora Servicios
Esterilizadores
BIO-GAS BM1

Table-top sterilizer features a programmable logic controller which automatically carries out the following phases: heating, initial vacuum, humidification, gas injection, sterilization, gas purge, aeration, automatic detection of failures, end-of-process alarm and cycle report print.


KEY FEATURES

Programming display to set cycles (37ºC / 8 hours or 55ºC / 4 hours) and ventilation times from 2 to 24 hours. Current phase in progress and time remainign are shown in display along the entire cycle.

Automatic break-cartridge system inside the chamber.

It works with vacuum technique, neutralizes the gas through bubbling water (by means of liquid-ring pump), has security thermostat and a humidification system.

In-chamber aeration eliminates the need to transfer the load to a separate aerator.

Eliminates any residual EO vapors to maximize operator safety when the door is opened.

Power outage cycle recovery.

The sterilizer does not need extra requirements for installation.

Small and easy-to-move design allows placing it on a table.

Automatic detection of failures.

All our sterilizers are subject to the following tests: dielectric strength, leakage current and earthling resistance.


DATA PRINTER | PROGRAMMING SCREEN

This model features data printer which records the sterilization parameters of the cycles.

The sterilizer is also equipped with a programming display to set the appropriate cycle for the items to be sterilized and to see the information of the running cycle: temperature, vacuum and time remaining.


TECHNICAL DATA

Designed to sterilize heat-and-moisture-sensitive medical devices.
It works with single use 100% EO cartridges (BIOLENE® 15 gr).
Chamber and cabinet enterily made of stainless steel.
Max.consumption 400w.
Power supply: 110V - 220V (on request).

CABINET CHAMBER
Height: 470 mm Height: 200 mm
Width: 630 mm Width: 200 mm
Depth: 840 mm Depth: 740 mm
Weight: 42 kg (aprox.) Capacity: 30 lts